Can you source brick / block machines from Gongyi? Yes—as a procurement coordinator, not as a factory. Share product sizes (hollow / solid / paver), a realistic shift-output target, and destination voltage—we map partner-plant options, molds, inspection, and export paperwork.
Sourcing role (coordinator, not a factory)
Gongyi Machinery coordinates sourcing from Gongyi-area partner plants. We help overseas buyers with configuration questions, vendor shortlists under NDA when needed, pre-shipment inspection / FAT coordination, and export documentation. We do not manufacture brick or block machines in our own plant, and we do not sell “factory-direct from our factory.”
Public pages stay brand-agnostic. Specific plant names are shared in quoting, under NDA, or on an arranged visit—not as logo wallpaper on this URL.
Companions: Importing from China, factory visit & QC, pre-shipment packing.
Not briquetting — cement vibration forming
This category is concrete brick / hollow-block / paver forming by vibration molding of cement, sand, and aggregate mixes.
It is not powder briquetting (coal fines, charcoal powder, mineral fines densified in a roller press). For densification of fines, see briquetting equipment.
Short contrast: briquetting densifies powders; this hub forms cement/concrete masonry products. Paths: /equipment/briquetting/ vs this hub.
Typical scope (category level)
First wave focuses on stationary small / semi-automatic vibration formers of the family shown in partner-plant photos (blue frame, red hopper, side control cabinet, pallet discharge)—not a full automatic QT line or egg-layer. Higher-automation lines can be discussed as a separate quote if that is what you need.
Buyers usually ask about:
- Hollow-block configuration — masonry blocks for walls / partitions → semi-automatic hollow block machine
- Solid cement-brick configuration — solid bricks on the same host family with a different mold → small cement brick making machine
- Mold change — hollow / solid / colored paver molds as a quotation question
- Upstream peripherals — mixer, batching, and pallet handling as scope questions (not mandatory sub-pages in this first batch)
We intentionally avoid unverified “blocks per hour showcase” numbers on the public page. Output belongs on your duty sheet and is confirmed against a partner-plant quote.
Spec checklist (inquiry fields only)
Use this as the WhatsApp paste backbone. Ranges are fine while the project is still moving. No model codes or capacity figures are published here until a partner plant confirms them against your duty sheet.
Product & duty
- Target product family (hollow block / solid cement brick / paver / mix)
- Product dimensions (L × W × H) for each mold you care about
- Target pieces per mold / per cycle (if known)
- Shift-output target (blocks or bricks per shift — buyer-stated)
- Indoor / outdoor yard notes that affect motors and covers
Mix & materials
- Cement / sand / aggregate / fly-ash (or other) expectations
- Moisture / workability notes if known
- Whether colored face mix or paver molds are in scope
Machine / utilities
- Manual vs semi-automatic preference (full-auto QT / egg-layer = separate discussion)
- Voltage and frequency at destination
- Preferred documentation language
- Pallet type / size preference
- Spare-parts kit expectations for year one
Commercial
- Destination port
- Incoterm preference if known
- Inspection tier (photos / FAT / third party)
Inspection & export coordination
Lock the PO against the checklist, agree photo/video + nameplate evidence (plates missing on the first photo set), choose FAT/third-party if needed, then pack to the Incoterm.
- Factory visit & QC checklist
- Pre-shipment packing checklist
- Pre-shipment inspection checklist
- Importing from China
First WhatsApp / request fields
Message WhatsApp +86 18695901333, WeChat 13213181166, or Request a sourcing proposal with the checklist above.
CTA wording: Request a sourcing proposal / Get a coordinated quote — never “factory quote.”
Example WhatsApp message (copy/paste)
Hello — requesting a sourcing proposal for brick/block equipment (Gongyi).
Product: [hollow block / solid cement brick / paver], size ~[L×W×H]
Pieces per mold (if known): [ ]
Shift output target: [ ]
Mix notes: [cement/sand/aggregate/fly ash]
Scope: [machine only / + mixer / + molds list]
Power: [V]/Hz]
Port: [ ], Incoterm preference: [ ]
Inspection: [photos / FAT / third party]
Send to WhatsApp +86 18695901333. We will reply with clarifying questions—not a fake “factory-direct” pitch.
Related machines & paths
- Semi-automatic hollow block machine
- Small cement brick making machine
- Briquetting equipment — powder densification, not masonry forming
- All equipment
- Request a sourcing proposal
FAQ
Do you manufacture brick or block machines?
No. We coordinate sourcing from Gongyi-area partner plants.
Is this the same as briquetting?
No. This hub is cement / concrete vibration forming for building blocks and bricks. Powder briquetting lives under briquetting.
What do you need for a quote?
Product sizes, pieces-per-mold if known, shift-output target, mix notes, voltage/frequency, destination port, and inspection tier. Model codes and exact capacity are confirmed only after a partner-plant quote against your duty sheet.
Can we visit a plant or arrange inspection?
Yes—photo QC, FAT, and third-party options can be coordinated. Say which tier you want so the proposal lists it. See the factory-visit checklist.
Do you cover full-automatic QT lines?
This first category page focuses on small / semi-automatic formers. If you need a full-auto QT line or egg-layer, say so in the inquiry—we can treat it as a separate sourcing scope.
CTA — request a sourcing proposal
Ready to send the checklist?
- WhatsApp: +86 18695901333
- WeChat: 13213181166
- Web: Request a sourcing proposal — “Get a coordinated quote” is fine; never factory-quote wording
- Contact person: Ma Xinjian (马新健)
- Location: Gongyi, Henan, China
Request a sourcing proposal ↗ · WhatsApp +86 18695901333 · WeChat 13213181166